2018 John Deere X384

Selling Price -

$4,750.00

Local Trade - Powered Bagging System!

Information

2018 John Deere X384

Lawn Tractor with 48-inch Deck
  • Exclusive 4-wheel steering for excellent maneuverability
  • 48-in. Accel Deep™ mower deck
  • Powered by 22 hp (16.4 kW) iTorque™ Power System
  • 4 year/300 hour bumper-to-bumper warranty

Features may include:

Engine is smooth running and reliable V-twin air-cooled design

The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive hood design that provide superior lugging ability, even cooling, and durability.

A 22-hp (16.4-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions.

  • 22 hp (16.4 kW)
  • Large 726-cc displacement
  • V-twin air-cooled design that provides smooth, quiet power

Quality features include:

  • Cast-iron cylinder liners
  • Overhead valves
  • Full-pressure lubrication
  • Replaceable oil filter

Dual-stage air cleaner V-twin design:

  • Excellent power and performance
  • Easy starts
  • Smooth operation

FLYWHEEL ALTERNATOR

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

  • 15-amp capacity
  • Regulated to keep the battery at full charge without risk of overcharging
Four-wheel steer gives superior maneuverability and trimming ability

NOTE: In the schematic above, the solid line refers to a four-wheel steer tractor, and the hashed line refers to a two-wheel steer tractor.

Four-wheel steering provides very significant maneuverability and trimming advantages over that of two-wheel-steering-equipped tractors.

For example, with the X384 Select Series™ Tractor equipped with a 48-in. (122-cm) Accel Deep™ Mower (the following numbers correspond to the schematic above):

  • Uncut circle radius is reduced from 21 in. (53 cm) for a two-wheel steer X380 to only 9 in. (23 cm), eliminating or greatly reducing the need to back up when trimming around trees, shrubs, etc.
  • Interference from the mower and tractor wheels is eliminated because they are several inches away from the object being trimmed around.
  • Outside turning circle is reduced, reducing the time spent turning and increasing mowing efficiency.
  • Also, trimming inside curves around flower beds or other landscaping can be done more completely with a 4-wheel steer tractor.

DESIGNED FOR TIGHT TURNS

The four-wheel steering system is designed for tight turns, leading to greater mowing efficiency:

  • Caster, camber, and kingpin angles are optimized to reduce effort, especially when going from straight ahead into a turn.
  • Steering geometry has been designed with the use of 3-D modeling, so all four tires are working together.
  • Sealed ball bearings are used on the torque shaft and the rear spindles to reduce friction.
  • Small scrub radius, less than 1 in. (2.5 cm) in the rear, reduces scuffing and bump-steer.

DESIGNED FOR EASY STEERING

Sealed ball bearings are used at critical all-wheel-steer joints for reduced friction, longer life, and less maintenance.

Easy steering is important for an enjoyable mowing experience:

  • Larger, 14-in. (35.6-cm) diameter steering wheel gives improved leverage for easier turns.
  • Larger sector gear gives improved (higher) steering ratio.
  • A higher ratio equals lower steering effort.

Photos

Highlights

  • $4,750.00
  • Enumclaw, Washington
  • Pre-Owned
  • 2018
  • John Deere
  • X384
  • GREEN
  • KAWASAKI
  • 151.4
  • Equipment mounting: heavy duty | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
  • Gas
  • Available
  • With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 41 in. (104.1 cm)
  • 47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)

Specifications

  • 2018
  • John Deere
  • X384
  • Base
  • Riding
  • Model: FS651V
  • Overhead valve, full-pressure lube, oil filter
  • 22 hp (16.4 kW)
  • 44.3 cu in. (726 cc)
  • V-twin, cast-iron liners
  • Mechanical
  • Separate levers, automatic choke return
  • Air
  • Dry, replaceable with foam precleaner
  • Transaxle: Internal, not replaceable
  • Gasoline
  • Delivery: Pulse pump, carburetor
  • Gauge on dash
  • Manual, sector and pinion
  • Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Dual belt
  • Fuel tank location: Rear | Hourmeter | Cruise Control: button on dash | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: On fender and under seat | Service interval decal | Cup holder | All-wheel steer | Preset cut height | Mower deck type: Side discharge | Mower wash port | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
  • Internal wet disc
  • Cast iron front axle, front wheel ball bearings
  • 15x6-6
  • 20x10-10
  • Mower: Four | Mower, adjustment: Seven-position, spring-loaded pin | Mower, rotate: 90 degrees for easy mower removal
  • 12 V (340 CCA)
  • Flywheel alternator, regulated, 15 amp
  • Engine: Bendix
  • Transaxle Forward speed: 0-5.9 mph (0-9.5 km/h) | Transaxle Reverse speed: 0-3.5 mph (0-5.6 km/h)
  • Equipment mounting: heavy duty | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
  • Welded heavy-duty
  • Fuel fill opening, On left fender: 3 in. (7.6 cm) | Steering, Uncut circle radius: 9 in. (22.9 cm)
  • 72 in. (182.9 cm)
  • 47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 41 in. (104.1 cm)
  • 49.4 in. (125.5 cm)
  • 48 in. (122 cm)
  • Steering: 15 in. (38.1 cm)
  • Back: 15 in. (38.1 cm)
  • Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm)
  • Large: 14 in. (35.6 cm)
  • Tank: 3.3 U.S. gal. (12.5 L)
  • Mower, no fuel: 700 lb (318 kg)
  • Two standard, incandescent, 27 W
  • Meets ANSI standard | Meets OPEI standard | Safety video
  • Open-back design with grasp | Suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
  • Type: Foot pedal with adjustable spring assist
  • Hood: Molded-in color hood material reduces sound, will not rust or dent
  • Fender: Stamped steel | Mower: Stamped steel deck shell, 10 gauge 0.135 in. (3.4 mm)
  • 13 positions
  • 4 year/300 hour bumper-to-bumper